Please be advised about the discontinuation of the 3M 9542A (carbon,P2, un-valved) and the introduction of the replacing 3M 9542V (carbon,P2, valved) respirator.

This range of Honeywell filters suit the legacy North half face and full face masks, including the 5500 & 7700 series half masks and the 7600 series full face mask.

The science of fighting gravity.

Protecting workers takes more than just keeping them from falling. Their tools also need to be protected at height. That’s why for over eight years, we’ve been pioneering an innovative line of products and solutions to help prevent dropped tools and equipment. From construction sites to oil rigs, we help make work environments safer and more productive by protecting workers from hazards that can result in personal injury, equipment damage and tool loss.

Learn how to make virtually any tool ready for tethering

9701434 Common Attachment Points Poster

3M Fall Protection For Tools Catalog

STAY SAFE AND KEEP IT CLEAN

For your safety, it is important to follow general safety guidelines as well as recommendations for the proper way to clean and disinfect Honeywell Miller® Fall Protection equipment.

GENERAL HARNESS SAFETY GUIDELINES

1. Warnings – Always read all instructions and warnings.
2. Inspection – All fall protection equipment must be inspected prior to each use.
3. Training – All workers should be trained by a Competent Person.
4. Regulations – Understand all Federal, State, Local, and Provincial regulations pertaining to fall protection before selecting and using the equipment.
5. Rescue Planning – Minimize the time between a fall occurrence and medical attention with a rescue plan.
6. After a Fall – After a fall occurs, all components of the fall arrest system should be removed from service.
7. Work with a Safety Professional – Reach out to your Honeywell Miller Safety Professional with any questions.

The new Crux Reservoir system from CamelBak delivers 20% more water per sip. The Crux Collection comes in a variety of styles and sizes.

CamelBak Crux Reservoir with QuickLink

Video

How to calculate clearance?

In order to help you safeguard your teams' operations, see below our clearance calculator for the ABSORBICA product line (versions from 2020 onward).

Frequently Asked Questions - Aura 9320A+ and 9322A+ Bulk Packs

How are CPS and rebate programs going to be managed?

The standard price per respirator and contract price arrangements per respirator remain unchanged regardless of the packaging.

What does this mean with our existing orders for 9320A+ and 9322A+ in the system / When will we be supplied with those orders / When current boxes run out what happens to back orders?

Stock delivered in June will have the standard box packaging. From July onwards, stock will be delivered in bulk packs.

An email from the distributor confirming willingness to receive the new codes instead of the old codes would suffice to update backorders.

Alternatively, the backorders with old codes can be cancelled, and new orders can be placed using the new codes.

Are all the back orders going to be consolidated and then shipped in new volumes?

For orders that would be supplied with 9320A+ or 9322A+ from July onwards, yes this can be done, provided the distributor confirms via email their willingness to receive the new codes

What happens to distributors who have their end users wanting less than case quantities of 9322A+ or volumes that are not a multiple of 200 units?

The intention behind bulk packing is to increase productivity and release orders faster. However, this comes at a cost of ordering by the case unfortunately.

How do distributors sell this product in less than carton QTY do they have the fitting instructions etc. on the packaging?

According to the TGA they cannot be sold loose either by 3M Au or by 3M authorised distributors.

Can distributors repackage into smaller volumes?

Yes

Can distributors sell individual masks?

As per TGA, neither 3M Australia nor 3M distributors would be able to sell individual units unless it comes with user instructions, 3M sponsor details, the required intended use, the product cat code, lot number and expiry.

Do you have any indication if this will be a permanent change considering the communication state effective July?

No changes until further notice

3M Aura 9320A+ and 9322A+ standard packs – update

Based on some customers feedback, a limited quantity of the 9322A+ (standard packs XA010017854 are on plan to be delivered in July.

Prioritization of stock

We continue to focus on Healthcare with support for critical industrial and key industries.

The majority of our stock on hand is being released to Healthcare/Frontline HC workers dealing with Covid-19 and Govt/Hospitals and the remaining to Critical Infrastructure and existing DR customers in Industrial markets

DR Quantities and ETAs cannot be committed to customers because demand from frontline customers is being prioritised.

Regards

HOW TO INSPECT YOUR HELMET

View all of our tips and recommendations to verify that your helmet is still in good working condition.

EVERYTHING YOU NEED TO KNOW ABOUT ACCESSORIZING VERTEX AND STRATO HELMETS

Professionals who work at height or on the ground understand that head protection goes well beyond simply wearing a helmet. This is why Petzl has developed a full line of modular accessories for you to customize your helmet for the specific needs of the task at hand. Eye shields, face shields, nametag holders, neck protectors, headlamps, etc. These accessories are now compatible with all VERTEX and STRATO helmets (VENT, HI-VIZ…) and take just a few seconds to install!

When using equipment to belay or to maneuver, carabiners are a vital link in the safety chain. User safety often relies on a single carabiner. To avoid the risk of breaking or accidentally opening a carabiner, it is important to know how to choose and use them.