Products

Features a steel O-ring Sternal attachment, steerl D-ring dorsal attachment, Pole Strap steel D-rings, adjustable confined space loops & a padded waist belt

The IGNITE PROTON WIND features all the same attributes as the PROTON but with the following additions to this already �state of the Art' harness;� Synthetic rear protection plate on the rear of the AIRPAD waist belt. Provides protection to the AIRPAD in the...

The IGNITE PROTON WIND features all the same attributes as the PROTON but with the following additions to this already �state of the Art' harness;� Synthetic rear protection plate on the rear of the AIRPAD waist belt. Provides protection to the AIRPAD in the...

The IGNITE PROTON WIND features all the same attributes as the PROTON but with the following additions to this already �state of the Art' harness;� Synthetic rear protection plate on the rear of the AIRPAD waist belt. Provides protection to the AIRPAD in the...

The comfortable complete sit harness with chest ascender and removable top part. RECORD is the only IGNITE harness that has a sports approval and all rope access equipment certifications. This gives it the lightness of a sports harness that can be used in tree...

The comfortable complete sit harness with chest ascender and removable top part. RECORD is the only IGNITE harness that has a sports approval and all rope access equipment certifications. This gives it the lightness of a sports harness that can be used in tree...

The comfortable complete sit harness with chest ascender and removable top part. RECORD is the only IGNITE harness that has a sports approval and all rope access equipment certifications. This gives it the lightness of a sports harness that can be used in tree...

This full-featured fall arrest harness with sliding plate and climbing protection eyelet was specially developed for wind energy, but it is also used in many other areas such as telecommunication, energy supply and construction where the highest demands on safety and functionality apply. IGNITE...

This full-featured fall arrest harness with sliding plate and climbing protection eyelet was specially developed for wind energy, but it is also used in many other areas such as telecommunication, energy supply and construction where the highest demands on safety and functionality apply. IGNITE...

The neck band of the INCEPTOR GRX is infinitely adjustable; it is suitable for head circumferences of 54 to 63cm and ensures optimum fit and comfort. The ADJUSTER sits deep on the back of the head and ensures an ergonomic grip. The ADJUSTER is...

The ergonomic chin strap with magnetic Fidlock buckle is easy to open and close. The buckle closes securely and also prevents any trapping of skin. The CHIN-X 250 is fitted as standard with all INCEPTOR GRX models and will release in accordance with industry...

This sculpted, all-purpose visor protects your face from impacts or loose objects. It is made of polycarbonate with high impact protection. CONTOUR X can be easily and quickly attached to the VISIERCARRIER (BE-489) using the gear rack of any INCEPTOR GRX helmet without additional...

This pre-shaped, multi-purpose visor is a complete face shield with integrated chin protection. It is made of polycarbonate and provides protection from arc flashs caused by electrical short circuiting as well as complete protection from impacts. CONTOUR X can be easily and quickly attached...

The INCEPTOR GRX is redefining the concept of safety. The specially-designed EPS thorax and PC/ABS shell absorb particularly high impact energies, both in the vertex area and at the side. The largest possible ventilation holes and ergonomic EPS thorax ensure exceptional wearing comfort. The...

The INCEPTOR GRX is redefining the concept of safety. The specially-designed EPS thorax and PC/ABS shell absorb particularly high impact energies, both in the vertex area and at the side. The largest possible ventilation holes and ergonomic EPS thorax ensure exceptional wearing comfort. For...

The Skylotec Inceptor GRX High Voltage Helmet has all the features of the standard Inceptor Helmet, as well as being rated to EN50365:2002 for electrically insulated helmets. The INCEPTOR GRX HIGH VOLTAGE is redefining the concept of safety. The specially-designed EPS thorax and PC/ABS...

Inceptor GRX Replacement Gear Rack

The warm HELMET CAP with high-quality Gore Windstopper is made from soft fleece. It fits like a second skin, reliably protects the ears in cold weather and fits perfectly under helmets such as the INCEPTOR GRX.

Inceptor EAR MUFFS to visor carrier.   27dB rated These earmuffs provide outstanding noise protection, especially for high frequencies. The EARMUFFS are utilized when using the CONTOUR visor on the INCEPTOR GRX and thus the existing Euroslot is already reserved for the VISIERCARRIER which...

The helmet lamp clip, which can be inserted into the front Euroslot on the INCEPTOR GRX range, keeps the HIGH LIGHT headlamp in place without having to use an elasticated strap.

The high-quality interior padding set for all INCEPTOR GRX helmets is 6 mm thick and ensures a particularly high level of comfort. It is easy to exchange and clean.

Reflective stickers to increase visibility and therefore also safety. All INCEPTOR GRX models can be transformed into highly reflective helmets using these stickers. The self-adhesive stickers can simply be removed from the backing and stuck onto the helmet.

Replacement headlamp clips for all INCEPTOR GRX helmet models. Simply clip in and go!

Multifunctional tubular cloth with many wearing possibilities. The lightweight cloth dries quickly and is comfortable to wear. Thanks to its size, it fits in any bag, its always ready to use.

NECKX protects against the hazards of direct sunlight, which can often be a problem when working outdoors. The high-tech canvas fabric protects against UV rays and will keep you cool at the same time. NECKX can be attached to all INCEPTOR GRX models using...

With 6 millimetre thick padding, the high-quality HEAD PAD thin makes the INCEPTOR GRX pleasantly comfortable to wear. The interior padding can be exchanged very easily thanks to the Velcro fastening and is the ideal replacement item for making a worn INCEPTOR GRX seem...

With 2 millimetre thick padding, the sweat-absorbing FORE HEAD PAD thin makes the INCEPTOR GRX pleasantly comfortable in the forehead area. The sweat band can be exchanged very easily thanks to tiny press studs and is the ideal replacement item for making a worn...

This visor holder is suitable for all Centurion CONTOUR visors. It fits perfectly into the 30-mm Euroslot on the INCEPTOR GRX and provides the necessary connection between helmet and visor. With its smart pivot system, it follows the helmet contour and can be tilted...

Jackpod Base Cap

Specially designed base for the use of the JACKPOPD Davit system on a flange connection.

The JACKPOD CAP cover is used to prevent dirt from falling into the bases, which are firmly attached to the ground, when they are not in use and to ensure that they are not impaired during use.

The JACKPOD-Series Corner Mount Base is designed to vertical structures including beams, columns, tanks, walkways and concrete surfaces. The product may only be used with SKYLOTEC DAVIT arms and also all accessories must have been designed, manufactured and/or approved by SKYLOTEC. All system components...

The JACKPOD-Series Floor Mount Base is designed to vertical structures including beams, columns, tanks, walkways and concrete surfaces. The product may only be used with SKYLOTEC DAVIT arms and also all accessories must have been designed, manufactured and/or approved by SKYLOTEC. All system components...

The JACKPOD series is designed to be installed into an existing concrete surface and to provide a permanent support for the installation of a davit arm. May only be used with SKYLOTEC�s DAVITS and also all accessories must be designed, manufactured and/or approved by...

The JACKPOD-Series Wall Mount Base is designed to vertical structures including beams, columns, tanks, walkways and concrete surfaces. The product may only be used with SKYLOTEC DAVIT arms and also all accessories must have been designed, manufactured and/or approved by SKYLOTEC. All system components...

Lower pole max. 1016 mm long only for use with JP-002-1/2 and JP-003-1/2/3/4/5/6/9/10 and 11.

Lower pole max. 1016 mm long only for use with JP-002-1/2 and JP-003-1/2/3/4/5/6/9/10 and 11.

Top pole 1170-1400mm long only for use with JP-002-1/2 and JP-003-1/2/3/4/5/6/9/10 and 11.

Top pole 1170-1400mm long only for use with JP-002-1/2 and JP-003-1/2/3/4/5/6/9/10 and 11.

JACKPOD WINCH OVERLOAD PROTEC is an overload clutch when using a drill (for the correct choice of drill, see section 6 of the instruction manual). Can only be used in conjunction with JP-009-1.

The JACKPOD BASE PORTABLE is a portable stand for use with the JACKPOD Davit system.

Jackpod SRL Anchor rope 1,55mt

Jackpod SRL Anchor rope 1,55mt

Skylotec Jackpod SRL Anchor rope 2.5m (JP-017-2.5) kylotec JACKPOD ANCHOR CABLE, spare part for the portable and stepwise height-adjustable system JACKPOD DAVIT SET. ART. NO. JP-017-2,5 EAN 4030281223870 STANDARD EN 795-B:2012 E-CLASS NUMBER 40-02-01-90 MAX. SERVICE LIFE 10 Years MAX. NUMBER OF PERSONS 1 CUSTOMS NO....

Flexible fall prevention for working in confined spaces is now easier than ever with the tripod systems. The portable and stepwise adjustable systems require only a small working base area and are easy to transport and store thanks to their low weight and volume....

Flexible fall prevention for working in confined spaces is now easier than ever with the tripod systems. The portable and stepwise adjustable systems require only a small working base area and are easy to transport and store thanks to their low weight and volume....

The WINCH 1 and 2 combine many advanced safety features such as multiple pawls, a secondary coasting actuated brake, an easy to read visual brake wear indicator, an easy to read visual overload indicator on the snap hook and an optional use indicator. These...

Jackpod Winch 18mt. BRACKET to DAVIT

Jackpod Winch 18mt. BRACKET to TRIPOD 2.26m

Jackpod Winch 18mt BRACKET to TRIPOD 3.02m